Underpass Flared End Sections |
|
Tie bolt holes are provided for the installation of tie bolts between the flared end section and the adjacent pipe. |
|
|
| SIZE W x H |
SLOPE | T | A | B | LAYING LENGTH | F | G | K | WEIGHT PER SECTION |
|---|---|---|---|---|---|---|---|---|---|
| FEET | X to Y | INCHES | FEET | FEET | FEET | FEET | INCHES | INCHES | LBS. |
| 4 x 5 | 1.7 to 1 | 5 | 2'-6" | 5'-0" | 8 | 6 | 5 | 5 | 7320 |
| 4 x 6 | 2 to 1 | 5 | 2'-11" | 7'-0" | 10 | 7 | 5 | 5 | 10650 |
| 5 x 7 | 1.6 to 1 | 6 | 3'-6" | 7'-5 1/2" | 9 | 7 | 5 | 7 1/2 | 13100 |
End section is manufactured in accordance with applicable portions of ASTM Specification C76.
| Download this page in the following formats |
|
 AutoCAD r14 |
 Acrobat 3.01 |
Service Tunnel Flared End Sections |
|
Tie bolt holes are provided
for the installation Weight = 18160 Lbs. |
|
|
End section is manufactured in accordance with applicable portions of ASTM Specification C76.
| Download this page in the following formats |
|
AutoCAD r14 |
Acrobat 3.01 |
Copyright © 1999 The Cretex Companies, Inc.. All rights
reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of
their respective companies or mark holders.
